1. First off, you need to get your Pi to transmit sounds by using PiFM, download the binaries from icrobotics (download), extract them and run the following commands in the same folder:
$> sudo python
>>> import PiFm
2. To expand your range connect a 20cm plain wire to the Pi’s GPIO 4 to act as antenna. GPIO 4 is the 4. pin on the on the left row (inner row) of pins. I simply cut a wire of its plug and twisted it around the pin.
3. Tune your FM radio to your preferred frequency, I’ll choose 106,7 Mhz.
4. To change the boadcast frequency run the ./pifm binary as following:
sudo ./pifm sound.wav 100,0
This will broadcast on frequency 100 Mhz. In most countries only frequencies between 88 Mhz and 108 Mhz are working properly.
Run the ...Read More